What are the common problems and malfunctions of LED panel lights23-11-2021
For matters related to the installation of LED street l […]
For matters related to the installation of LED street light sources, the identification must be distinguished when installing the led street light source. The light source for the sun lamp generally adopts DC 12V or 24V voltage, and the voltage and power should be distinguished when installing, and a well-matched light source should be used. Since the power of the light source is different, the lighting time is also different. When wiring, you must strictly follow the corresponding wiring diagram; because each lighting system is an independent working unit, the light switch time is slightly different, which is a normal phenomenon. When replacing the light source, be sure to pay attention to the size of the light source, and do not replace products with different power types. Next, we will understand the matters needing attention when installing led street lights.
Precautions when installing street lights.
The installation and wiring of the lamp must be carried out in the event of a power failure.
The joints of the power cord must be insulated and waterproofed.
The power cover cannot be energized when it is opened to avoid electric shock.
The glue in the lamp can not be removed casually, so as not to affect the heat preservation and heat dissipation.