What should be paid attention to in the use of anti-glare LED lights

The anti-glare LED lamp adopts imported medium-power LED chips. Due to its low power and low heat generation, the luminous efficiency reaches more than 110lm/W, which is higher than the average luminous efficiency of traditional light sources and high-power LEDs. The substrate and shell dissipate heat, and the average life span can reach more than 50,000 hours; the LED chip is small in size, and the luminous intensity per unit area is lower than that of traditional light sources, which effectively reduces the glare of the light source and protects eye health. Using imported optical materials and chips in one package, the light output angle reaches 120°, the lamp efficiency reaches 90%, and the energy-saving is more than 40% compared with traditional gas discharge lamps; Compensate and balance the circuit to ensure the stability and reliability of the circuit and prolong the service life of the LED; the shell is extruded from aluminum alloy and the surface is sandblasted and hard anodized, with excellent thermal conductivity, corrosion resistance, and impact resistance.
Precautions for anti-glare LED lights:
1. When receiving the goods, please carefully check whether there is any damage to the product during transportation, such as scratches on the casing, cracks, broken glass and bulbs, etc.;
2. After the product is unpacked, please check whether the accessories in the box are complete, such as instruction manual, product certificate, installation accessories, etc.;
3. After the lamp is installed, check whether the anti-glare LED lamp is connected correctly before supplying power and whether the installation is firm, and only after ensuring safety can the power supply be normal;
4. When installing and replacing bulbs, bulbs of the same type and power should be used; if the bulb type or power is changed, the corresponding matching ballast should be replaced;
5. There is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; the center of the transparent part has a high temperature and should not be touched;
6. The cold start time of the light source is (3-10) minutes. It is a normal phenomenon that the light bulb cannot be restarted under high-temperature conditions. It is recommended to wait for the light bulb to cool down a little before starting it;
7. When disassembling and maintaining lamps, they should be operated by professionals. If abnormal phenomena are found, they should be disconnected and repaired. Non-professional maintenance personnel is not allowed to repair without authorization; the power must be disconnected before the operation, and the anti-glare LED lights must be reliable. ground.