What factors need to be considered in the correct selection of led street lights?

To choose the right Led Street lamps Factory in China, we first need to consider the luminous efficiency of street lamps. LED lighting technology is becoming more and more mature, and high-power LED light sources can meet the luminous flux required by general street lamps. The luminous flux of general high-pressure sodium lamps is 100LM/W, and the commonly used high-power LEDs are 50-60LM/W. The best foreign LED chips can reach 80LM/W. The higher the luminous efficiency, the better the energy-saving effect. One of the most important indicators for choosing led street lights. In addition, the light attenuation of led street lights is also one of the considerations. As street lights that need to be used for a long time, it is absolutely not allowed to use such low-power leds. If high-power leds (generally above 30W) are used, the light attenuation will be much better.
Led Street Lights is also a factor that Led Street Lights Factory needs to consider when choosing. In this regard, the lightest one is better. Finally, what we need to understand is the heat dissipation of LED street lights. Because LEDs are semiconductor components, their chips are affected by temperature. When it is reduced to 30% of the initial luminous flux, it will lose its lighting significance, that is, its lifespan is over. In theory, the lifespan of high-power LED street lights is 30,000-50,000 hours, but its important prerequisite is good heat dissipation.
Precautions for installing led street lights
1. The installation and wiring of lamps must be carried out under the condition of power failure.
2. The joints of the power cord must be insulated and waterproofed.
3. Do not power on when the power cover is opened to prevent electric shock.
4. The glue in the lamp should not be removed at will, so as not to affect the insulation and heat dissipation.

5-Year Warranty Aluminium Die Casting IP65 Led Street Lights SLR09
LED Power Consumption: 30W-200W
Operating Voltage: AC 100-240V 50/60HZ
Power Factor: >0.9;
LED Luminous Efficiency:120-160 lm/W
Color temperature:2700-6500K;
Color rendering index:Ra≥70;
Material: Die-casting aluminum body;
IP Rating: IP65;
Warranty: 3-5 years;
Finishes: DOUBLE GRAY /Black / Silver;