How to ensure that LED street lights can work normally?

Optional tips for LED street light controller: To choose a high-efficiency charge controller with MCT charging mode controller can automatically track the maximum current of the solar panel, especially in winter or low illumination, MCT charging mode is about 20% more efficient than other Higher; the controller should be selected, the controller has lower working power consumption, 24 hours a day, because they have a large power consumption and will consume a certain amount of energy, the best choice for the controller with a power of 1 mA or less; should With two-way power regulator to choose, the power regulation of this controller has been widely promoted, at night when there are few pedestrians, it can automatically turn off one or two lights to save electricity, and the power can also be adjusted for LED lights.
China Led High Bay Lights Factory can be divided according to the charge distribution of the three steps of photovoltaic power generation, power storage colloidal batteries, and lighting power consumption. The radiation amount of photovoltaic solar cells in the three steps changes in a year, and the natural battery storage capacity also varies. are not the same, and since the lighting power controller set is fixed, this will inevitably lead to failure to light up normally in some cases. Therefore, the entire system configuration of the organic LED street light design fundamentally guarantees 100% of the annual lighting. And with changes in power storage technology and adjusted lighting power usage, it will be key to achieve 100% annual street lighting.

50W-200W IP65 5 Years warranty Warehouse High Bay Lights
TECHNICAL PARAMETERS:
LED PowerConsumption:50W,100W,150W,200W
Operating Voltage:AC100-240V 50/60HZ
Power Factor:>0.90
LED Luminous Efficiency:100-140LM/W
Lamp Efficiency:>0.8
Material:Die-casting aluminum body
IP Rating:IP65
Warranty:3-5 years
Finishes:White/Black/Gray