News

How many watts is suitable for installing solar street lamps?

Update:09-11-2022
Summary:

1、 Light source configuration of conventional solar str […]

1、 Light source configuration of conventional solar street lamp

5m solar street lamp is equipped with light source: 9W - 18W;

6m solar street lamp equipped with light source: 18W - 30W;

7m solar street lamp equipped with light source: 30W - 42W;

8m solar street lamp equipped with light source: 42W - 60W;

9m solar street lamp equipped with light source: 60W - 80W;

10m solar street lamp equipped with light source: 80-100W;

This China Led Street lamps Suppliers method is the most commonly used scheme in the construction of solar street lamps in the new countryside. How about the brightness of the light source according to this standard? A very vivid sentence is: It's OK to read at the bottom.

2、 What factors affect the light source size

1. The height of the pole.

2. The width of the road.

Principles to be followed during battery use:

1. The allowable operating temperature range of sealed battery is - 15 ° C~50 ° C, but the service life of battery can be extended when it is used within 5 ° C~35 ° C. The chemical composition of the battery will change below - 15 ℃ and cannot be charged. The battery will have a long life but low capacity when operating at low temperature, and a high capacity but short life when operating at high temperature.

2. The battery must be stored in a dry and cool environment. The self discharge rate of maintenance free battery is 3-4% per month under the environment of 20 ℃, which increases with the temperature. The designed floating charge voltage is 2.3V/knot. The 12V battery is 13.7V. In addition, when the battery is floating or evenly charged, the gas generated inside the battery is electrolyzed into water on the negative plate, so as to maintain the capacity of the battery without adding water. However, the corrosion of the battery plate will reduce the battery capacity.

3. If the battery is not recharged within 72 hours after discharge, sulfate will attach to the electrode plate and damage the battery. The maintenance free battery means that it is not necessary to add liquid, but it is necessary to regularly check the shell for cracks and electrolyte leakage.

IP65 Waterproof 50W-200W Round LED Street Lights SLR08
LED Power Consumption: 50W-200W
Operating Voltage: AC100-240V 50/60HZ
Power Factor: >0.90;
LED Luminous Efficiency: 100-140LM/W
Lamp Efficiency: >0.8;
Material: Die-casting aluminum body;
IP Rating: IP65;
Warranty: 3-5 years;
Finishes: White/Black/Gray;